I have installed Musescore 2.3 and MDL 1.1, but nothing I do seems to get the new sounds to work with my old scores. For some reason, saving to score does not work. What do I need to do?
Hey guys, i've been taking my High school's show and putting it into musescore so we can have an audio version to practice with personally, but I am struggling with the drumline. Here is the score: https://musescore.com/user/7466921/scores/5199475#comments if anyone knows why I can't upload the drumline parts please let me know!
I've been working with Musescore's software to write music for my drum line group, but when we go back to play the music the Unison Bass Clicks and Hits are always silent? Does anyone know a solution to make them have the sounds they're suppose to?
Do you typically try to support users here or in the general support forums? MDL looks good so far. But navigating Musescore's website is rather lame especially trying to search for specific problems. I'm having better luck with Google using inurl:musescore.com
Just wondering if you guys have an inside hack for support, or are you just paining through reading all of the support forums looking for MDL related stuff.
Here is a support question for you guys:
does MDL support additional soundfonts? this is pretty much going to determine whether I get it or not.
When will the suspended cymbal be added
Please help! I just upgraded to Musescore 2.3.2. I have been trying to install the MDL extension. It appears to be installing. It will get past "Please wait, loading soundfonts..." then it will sit there for a little while and then Musescore will close. When I open it back up there are only a few soundfonts under Zerberus in the Synthesizer. This last time it loaded MDL_BassLine.sfz, MDL_CymbalLine.sfz, MDL_DrumSet.sfz, MDL_Flubs.sfz, and MDL_Snare.sfz. I have tried to manually add the rest of them and can add a couple, but there are a couple that when I try to add it tells me "Cannot load SoundFont C:/Users/Owner/Documents/MuseScore2/Extensions/mdl/1.1/sfzs/MDL_TenorLine.sfz"
My system requirements far exceed the minimum requirements for the software.
Can someone please help!
I seem to be having an issue trying to upload a score with MDL sounds... I haven't had this problem until now and I've tried both saving synth to score and save to online in the application. I always get a very long processing screen and then a blank page. The download link also provides only errors, however when I go to update the score the file is there.
1.1 was released today.
The balance of sound should be increased if using 2.3.1 and will be VERY increased if using 2.3.2. :-)
PLEASE give feedback for continued improvement. Hope to get another release out within a week or so.
In the next release will be emphasis on making sure all hits are more even and consistent.
Cymbals will, unfortunately, not be addressed in the next release, but all other instruments can be adjusted.
I tried to upload my score for my bruno mars marching show with marching percussion but for whatever reason, the percussion is inaudible unlike how it is within the musescore client, any help would be appreciated.
I'm working on the MDL 1.1 update that I'm trying to get out ASAP.
Curious to see any requests that I might be able to sneak in.
Currently in are:
- Increased volume of all instruments and articulation
- Refined notation standard (a few minor improvements - will release with notation guide)
- Improved templates
- Evened out hits a bit across all instruments/articulations (this will be an ongoing effort)
- Fixed issue with adding accents or articulations to buzz/crush/roll
Cymbals and show style tenors are currently placeholder and will be addressed in a future update. Will be recording new samples (only instruments without custom samples).
The plan is to update MDL moving forward on a regular schedule. After 1.1.0 we should plan to update every weekly for the time being.
So, any urgent requests for 1.1?
Hey everyone, getting ready to release MDL 1.1 and as part of this have put together the first part of an Official Notation Guide.
It can be found here - https://musescore.com/user/29165763/sets/5097225
This will be followed up with tutorials that explain in more detail the best practices for marching percussion notation.
Tip: If you do not use the MDL templates, be sure to change the musical symbol font to Bravura (Style > General > Score). MDL is ONLY supported in Bravura.
1) Regarding bass drum unison audio playback (F key) for 5 bass drums - For upcoming MDL updates would it be possible to obtain an audio sample of a 5 bass drum unison hit (as opposed to a 6 bass drum line)? When I write battery scores for 5 bass drums and there's a unison hit, you can definitely hear the bottom bass 6 overtone more than drums 1-5 and the pitch is much lower and beefier on #6 than bass 5.
2) I'm having difficulty getting proper audio playback of 1-to-2 measure Crescendo and Decrescendo (from Piano to Forte). Audio play back simply goes from Piano on 1 bar to Forte the next. Any suggestions on how I can fix that?
There are 2 ways you can upload a score to Musescore.com.
Option 1 - Simply select File > Save Online - make sure to tick the box that says "upload score audio"
Option 2 - Before saving the score locally go to View > Synthesizer and select "Save to Score". This should save the synth settings in the score so that the server understands how to process.
Please also share your scores to this group! We love to see them (and comment :-) ).
If you have uploaded a score previously, and there is an issue with playback, simply follow the steps above and re-upload the score.
I am also putting together a number of tutorials for MDL. Here is the starting point:
If you have already installed, skip to the other tutorials at the bottom of the link that walk you though many of the other features of MDL.
So, soon I put out a first draft of a notation guide to start to walk through the MDL notation standard.
While some of what is presented in the MDL notation guide will be familiar if you have used VDL or other notation inspired by it. Some will be a bit different.
In creating the MDL standard, we looked at the VDL standard created by Jim Casella, Murray Gussek, and Hugh Smith... and actually had long conversations with the VDL creators to understand why they did some things in the way they did. One of the key influencing factors was the limitations of Sibelius at the time VDL was created.
Since the number of noteheads and articulations in Sibelius then were limited, they were forced to make some choices that were less than ideal.
With MDL and MuseScore 2.3, we did not have such limitations and were free to create. As a result, some of the types of notation you were used to using, that were awkwardly formed from limitations of Sibelius, have been replaced in MDL.
A few examples...
Crossovers on tenors. Some use a plus above the stem, which is actually commonly used for dampening, closing, or muffling.
Others use ( ) around a note, which is commonly used for ghost notes, particularly on drumset.
It is also common to see crossovers notated with a hollow diamond notehead, which completely breaks the format for note duration.
If you look in the MDL Workspace (make sure MDL is selected in bottom left) and open the MDL articulations palette you will see that there are actually 2 designations for crossovers - LOR (Left Over Right) and ROL (Right Over Left). This makes notation even more explicit or descriptive than any other option out there.
In case you are wondering, if there is an accented crossover, the crossover goes above the accent.
Back to skanks. I've seen that some notate these with an elongated V, which is actually a symbol for an up bow marking for instruments like violins, cellos, etc.
When we look at the actual technique of a skank, it is a hit with a quick hand mute followed immediately after. A + symbol would not be entirely accurate, as it would imply that the note would be muted upon attack, not after.
So, what is a skank? It is a quickly shortened rim shot.
In thinking about this, we have suggested (and the logic in MDL 1.1 supports) the notation of a skank as creating a rim shot on the 4th drum and then applying a staccatissimo articulation. This emulates both physical action involved in playing and also the modification of the rim shot.
As we more forward in releasing the full notation, very interested to get your thoughts, ideas, feedback. We truly want to make this in the international standard.
To help people get started with all the very different new features of MDL and to also talk a bit about things like percussion notation, arranging for percussion and pretty much anything else related, I'd like to start to do regular Twitch streams or Webinars that everyone can tune in to and participate.
Which do you think is better - Twitch? Webinar?
I am thinking to maybe do 2-3 days per week. One time that works best for US/Americas and another that is better for Europe/International.
What are best times for US/Americas (using EST)?
What are best times for Europe/International (using GMT)?
Bigger paper with more notes reduces page turns etc, but not everyone has access to legal size paper and larger. Are most folks doing Letter / A4 in landscape mode?
Hey everyone. I thought I'd drop the first post to get feedback on MDL and see how we can continue to improve.
We are currently working on MDL 1.1, which we hope to release in the next couple of days.
In this release we are working on some minor fixes in articulations, improving templates and also adjusting the sound of individual instruments (here is an example of sound updates in progress - https://soundcloud.com/musescorelabs/mdl-11-beta-tuning-test-fluid-flavor).
I'd love to get your feedback and suggestions on any aspect of MDL you think we can improve.
Wow. I have to say how impressed I am with MDL 1.0 When Daniel first came online talking about this project, I was skeptical. I didn't think we'd get a viable alternative to VDL for free. Yet, here we are. It's great work and a huge asset to the community.
Keep in mind, I primarily write for battery and all comments come with that lens.
First, it's very speedy to write battery parts. Tuplets get a little squirrely at times, but I'll chalk that up to learning curve on my end. Its fast enough that I find myself unreasonably annoyed with the things that aren't quite as fast.
One thing that slows me significantly is how much overlap I get with accents, articulations, dynamics and pictograms in the defaults. I spend a lot of time moving things to where they're readable. I don't think I've changed the default settings. For example, pictograms are showing up right in the middle of the staff. Even then, I find myself deciding it's "good enough" and moving on to something else. I don't love how some of my published scores look, but it's just the way it is.
On the 'feature request' side, one thing I miss about Sib is the percussions stickings text and how it aligns to notes without additional futzing by me. With the 'staff text' in MS MDL I press a lot of space bar and caps / lower case make things not quite aligned.
Second, audio playback is a B+ for the battery - and I'm being hyper critical. The sextuplets in particular are vastly superior to what I was getting in Sib + VDL. The flams sound great too. However, there are times when playback creates weird phaser / wooshing sounds that just don't happen in real life.
Finally - and I'll beat this point forever - I'm really missing the ability to dictate stickings - particularly on the snare drum - and have the audio follow. Patterns like shirley murphey's, egg beaters or even just paradiddles just don't sound quite right. They're less important on tenors and even less important on bass, but would still be nice.
All in all, it's amazing. I'm a fan and quickly becoming an evangelist for MDL. The entire team deserves praise.
I'm not sure how much help I will be as I am not a drummer per se, but I will help in any way I can! :D